Preparation,optimization and swelling study of carboxymethyl sago starch (CMSS)–acid hydrogel

In this study, sago starch was modified in order to enhance its physicochemical properties. Carboxymethylation was used to introduce a carboxymethyl group into a starch compound. The carboxymethyl sago starch (CMSS) was used to prepare smart hydrogel by adding acetic acid into the CMSS powder as the crosslinking agent. The degree of substitution of the CMSS obtained was 0.6410. The optimization was based on the gel content and degree of swelling of the hydrogel. In this research, four parameters were studied in order to optimize the formation of CMSS–acid hydrogel. The parameters were; CMSS concentration, acetic acid concentration, reaction time and reaction temperature. From the data analyzed, 76.69% of optimum gel content was obtained with 33.77 g/g of degree of swelling. Other than that, the swelling properties of CMSS–acid hydrogel in different media such as salt solution, different pH of phosphate buffer saline solution as well as acidic and alkaline solution were also investigated. The results showed that the CMSS–acid hydrogel swelled in both alkaline and salt solution, while in acidic or low pH solution, it tended to shrink and deswell. The production of the hydrogel as a smart material offers a lot of auspicious benefits in the future especially related to swelling behaviour and properties of the hydrogel in different types of media.     

Chemometrics-Assisted Optimization of Beta-/Gamma-Tocol Separation on a C<Subscript>30</Subscript> Stationary Phase in Reversed-Phase LC

This paper presents a chemometrics-assisted optimization study to improve the separation of tocopherol (-T) and tocotrienol (-TT) homologues on a C₃₀ stationary phase in reversed-phase HPLC. The HPLC settings were optimized using a central composite design and the response surface methodology. Flow rate, column temperature, and mobile phase composition were chosen as independent variables. Peak resolution (R_s), analysis time (t_R), and peak symmetries of the tocopherol isomers were chosen as response variables. Optimum performance in terms of R_s was obtained at a flow rate of 0.31 mL min^?1, a temperature of 8.70 °C, and % B content (methyl tert-butyl ether: methanol: water, 80:18:2, v/v/v) in the mobile phase of 38.12%. The analysis of variance and regression analysis gave adjusted R² values of 0.9841 for R_s, 0.9850 for t_R-(α-T), 0.9853 for t_R-(β-T), and 0.9204 for the peak symmetry of β-T. This confirms the good agreement of experimental data with predicted values. The close eluting peaks of β-/γ-tocol could be baseline separated at the optimized conditions at a minimized analysis time. Empirical second-order polynomial models were derived that gave statistically high significances (P?<?0.0001). Hence, the models can be successfully employed to predict the optimum separation conditions of co-eluting peaks of β-/γ-tocols. The optimized method was successfully applied to determine the individual tocol homologues in various cold pressed edible oils. Total contents ranged from 15 to almost 2600 mg tocol kg^?1 oil.     

Gas chromatographic separation of PCB and OCP by photocatalytic degradation

A photocatalytic degradation method was developed for polychlorobiphenyl (PCB) and organochloride pesticide (OCP) discrimination and quantification. A mixture of Aroclor 1260 and p,p′-DDT was irradiated at 254 nm by UV lamp (40 W) in the presence of TiO₂ (30 mg mL⁻¹ non-aqueous solution). Comparison of gas chromatograms showed that p,p′-DDT signals decreased significantly after irradiation, while Aroclor 1260s chromatograms did not show any difference before and after irradiation. Detection limits were 0.30 mg L⁻¹ and 0.15 mg L⁻¹ for p,p′-DDT and Aroclor 1260, respectively. The method was applied to spiked egg samples, the recoveries were found as 72% for DDT and 82.01% for Aroclor 1260.     

Biphasic epoxidation of 1-octene with H2O2 catalyzed by amphiphilic fluorinated Ti-loaded zirconia

A series of amphiphilic fluorinated zirconia containing titanium was prepared by titanium impregnation followed by fluorination and alkylsilylation of zirconium oxide. Physical properties of the resulting samples were characterized by XRD analysis, UV-vis spectroscopy, BET surface area analysis and EDAX analysis. The effects of fluorine and alkylsilane groups on the samples were studied by the epoxidation of 1-octene with aqueous hydrogen peroxide. The epoxidation of alkenes is one of the most important methods of functionalizing simple hydrocarbons. The amphiphilic fluorinated catalysts were more active and more efficient than the conventional titania-silica and zirconia-silica mixed oxides in linear alkene epoxidation; enhanced by the presence of alkylsilane and fluorine groups in the catalysts. Modification with alkylsilane successfully induces the hydrophobic behavior of zirconia which is hydrophilic in nature; whereas fluorine was chosen for its electron-withdrawing effect which further activates the titanium active sites.     

Pyrene Substituted Phthalonitrile Derivative As a Fluorescent Sensor For Detection of Fe3+ Ions in Solutions

Journal of Fluorescence - In this current study, the novel bis[4,5-(pyrene-2-yl)-3,6-(hexyloxy)] phthalonitrile (SPN) fluorophore has been successfully synthesized. Structural characterization of...     

A density functional theory study on multiple exciton generation in lead chalcogenides

Abstract

Quantum confined structure-based solar cell is promising two folds increment of the maximum theoretical photovoltaic conversion efficiency i.e., > 60% in comparison with that of the bulk analogs e.g., silicon-based and dye sensitized solar cell (ca. 32% of maximum theoretical efficiency). The key to the significant increment is the ability of the fluorophore to exhibit multiple exciton generation upon absorption photon with sufficient energy. Small size of lead chalcogenides (PbS, PbSe, PbTe) crystals have been reported and proven experimentally could exhibit this unique property. We have investigated few clusters of narrow bandgap lead chalcogenides nanocrystals i.e., (PbS)n, (PbSe)n and (PbTe)n; which n?=?4 - 80. The cluster models were optimized using quantum chemical calculations to the lowest energy geometry at B3LYP/lanl2dz level of theory. The predicted realistic (PbS)₈₀, (PbSe)₅₀, and (PbTe)₇₄ clusters with the size, and bandgap of 4.58?nm (2.00?eV), 4.03?nm (1.51?eV), and 4.84?nm (1.55?eV) are smaller than that of their exciton Bohr radius i.e., 5.01, 13.1, and 24.8?nm respectively. Therefore, the occurrence of multi exciton generation in the clusters is hypothesized upon absorption of photon with E_photon = 2E_g.     

Influence of nozzle area ratio on the gas-particle flow for single-hose dry ice blasting nozzle

Journal of Thermal Analysis and Calorimetry - In this paper, a numerical study was performed to examine the effect of divergent nozzle length of single-hose dry ice blasting on the development of...     

ITO electrode modified with Pt nanodendrites-decorated ZnO nanorods for enzymatic glucose sensor

Journal of Solid State Electrochemistry - This work demonstrated the property enhancement of Pt nanodendrite (PtNDs)-decorated ZnO nanorods (ZnONRs) modified indium tin oxide (ITO) electrode for an...